|
|
|
|
|
 |
|
 |
Security Alarm System ( Cybereye (CE-200F) ) |
|
 |
|
 |
 |
|
|
|
|
|
|
 |
|
Major Functions |
|
 |
● Calls up to 5 designated telephone numbers
● 24-hour intrusion and fire monitoring without monthly fee
● Verification by sound monitoring & voice warning from remote locations
● Adjustable entry and exit time delay
● Arms & disarms the system using any phone
● Based on the emergency situations, pertinent voice message is played
●(Ex: Door sensor activated, Fire sensor activated )
● Low battery indication with LCD & voice message for replacement
● Compatible use with all communication lines (Tone, Pulse, ADSL and ISDN )
● Emergency call can be made even if the phone or fax line is busy
● Selectable arming either total or perimeter
● Perimeter arming is a useful function for those who keep pets at home to prevent any undesired operation
● After confirmation, the system can be disabled to stop the calling cycle
● A microprocessor to prevent any undesired operation which may be caused by an external radio wave
● installed.
● Test mode for easy installation (Operation test between Cybereye and optional sensors)
|
|
|
|
|
|
Features |
|
|
|
|
|
| |
1.
Speaker
phone
1. Scares the intruder away with your
voice via speaker phone
1. - Siren
1. - Sounds an alarm when the telephone
line is cut
|
|
|
|
|
2.
Microphone
1. Sound monitoring from outside and
talk to each other with your phone |
|
|
|
|
3.
Intruder Alarm
1. When it detects an intruder, the
Cybereye calls the pre-stored phone
1. numbers (A preventive circuit for
undesired operation installed) |
|
|
|
|
4. Fire Sensor
1. It makes the Cybereye call the
pre-stored phone numbers when ambient
1. temperature exceed 60 °C
|
|
|
|
|
5.
Emergency
Feature
1. When an armed robber threatens your
family or an urgent situation arises
1. for the elderly / patients, he or
she may reach assistance by pressing
1. the emergency button on the remote
control |
|
|
|
|
|
|
|
|
|
Operation |
|
|
●
Applications
●
Apartment, Silver town, Officetel, Store, Bank,
Police station,
Hospital, Gas station, etc.
● anywhere
a wireless security system is needed.
● Detection Range
Direct
Connection to the Wall Outlet | | | 1. Connect the
phone code ② to the telephone outlet ③, and
then
connect the other end of the
1.
cord to the LINE jack on the
rear side of the
main unit ①.
2. Connect the power adaptor ④ to the
electrical outlet ⑤,
and then connect the cord of
the
1. adaptor to the power
jack on
the rear side of the main unit ①.
3. Set Power ON/OFF switch on the rear side of the main unit
① to the ON position.
4. Press “ ARMED” or “OFF”
button of the remote control and
check if the voice
message can
1. be heard.
(If it doesn't work
properly, turn the power switch to
OFF and ON for setup again)
5. After checking the
functionality of the wireless motion
sensor ⑥, set it
up at the chosen
1.
location.
※ The wireless sensor can be located up to 100 meters
away from
※
the main unit,which
may be shortened
depending on the site condition.
※ Make sure whether
the sensor works properly at the chosen location.
| | |
Connection
With a
Telephone | | | 1.
Install the system as above
2. Connect the telephone cord ⑦ to
the TEL jack on the rear side of the main unit ①
※ Caution : This system can be used by
connecting to
a normal telephone but not
※ compatible with a key phone.
※ Even if
the line is busy, when you press the “EMERGENCY” button
of the
※
remote control for
more than a second, any
phone call will be disconnected
※
after the voice message “ Line disconnected
for
emergency call”, and notifying
※ an emergency.
| | |
|
|
|
|
|
|
Installation |
|
|
●
Applications
●
Apartment, Silver town, Officetel, Store, Bank,
Police station,
Hospital, Gas station, etc.
● anywhere
a wireless security system is needed.
● Detection Range
Direct
Connection to the Wall Outlet | | | 1. Connect the
phone code ② to the telephone outlet ③, and
then
connect the other end of the
1.
cord to the LINE jack on the
rear side of the
main unit ①.
2. Connect the power adaptor ④ to the
electrical outlet ⑤,
and then connect the cord of
the
1. adaptor to the power
jack on
the rear side of the main unit ①.
3. Set Power ON/OFF switch on the rear side of the main unit
① to the ON position.
4. Press “ ARMED” or “OFF”
button of the remote control and
check if the voice
message can
1. be heard.
(If it doesn't work
properly, turn the power switch to
OFF and ON for setup again)
5. After checking the
functionality of the wireless motion
sensor ⑥, set it
up at the chosen
1.
location.
※ The wireless sensor can be located up to 100 meters
away from
※
the main unit,which
may be shortened
depending on the site condition.
※ Make sure whether
the sensor works properly at the chosen location.
| | |
Connection
With a
Telephone | | | 1.
Install the system as above
2. Connect the telephone cord ⑦ to
the TEL jack on the rear side of the main unit ①
※ Caution : This system can be used by
connecting to
a normal telephone but not
※ compatible with a key phone.
※ Even if
the line is busy, when you press the “EMERGENCY” button
of the
※
remote control for
more than a second, any
phone call will be disconnected
※
after the voice message “ Line disconnected
for
emergency call”, and notifying
※ an emergency.
| | |
|
|
|
|
|
|
Specifications |
|
|
ITEM |
CYBEREYE |
MODEL |
CE-200F |
CE-100 |
Function |
Intrusion |
O |
O |
Fire |
O |
O |
Emergency |
O |
X |
Power
Failure |
O |
X |
Gas
Leakage(option) |
O |
X |
Life
Sensor (option) |
X |
X |
Car
sensor (option) |
O |
X |
Detection
Range |
Detection distance 8
m( Horizontal: 90°, Vertical: 23° ) |
Detecting
Temperature |
Above 60°C |
Phone
No. Entry |
8 |
5 |
Memory
Phone No. Entry |
X |
Information
Confirmation |
LCD + Voice |
Voice message |
Voice
Range |
X
|
Voice
Alarm |
For Activated Sensors |
X |
Voice
Message |
Location and Emergency
type |
Wireless
Range
|
100m
(Depends on the
obstacles)
|
X |
Power |
AC adaptor
(DC 9V Rechargeable
Back-up battery)
|
AA size 1.5V X 3 |
Size |
204 X 96 X 60mm |
112 X 80 X 57mm |
Weight |
490g |
258g |
Options
|
Refer to Optional
sensors’ specifications
|
Wired door sensor |
|
|
|
|
|
|
Options |
|
|
Item |
Contents |
|
Wireless Motion Sensor (BS-200F)
It activates the Cybereye, wireless siren and wireless emergency
lamp with radio wave when it detects an intruder or a fire.
|
|
Wireless
Door Sensor (DS-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when it detects an intruder entering through a door or a window.
|
|
Wireless
Siren (SR-200F)
It sounds a loud alarm (105dB) when it receives a signal from a remote
control,
emergency switch or other optional sensors
|
|
Wireless
Emergency Switch (ES-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when the emergency switch is pressed.
|
|
Wireless
Smoke Sensor (SS-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when it detects a fire.
|
|
Wireless
Smoke Sensor (SS-300F)
It sounds an alarm and activates the Cybereye, wireless siren and wireless
emergency lamp with radio wave when it detects a fire.
|
|
Wireless
Gas Sensor (GS-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when it detects gas leakage.
|
|
Wireless
Window Sensor (WD-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when it detects a window breakage or impact.
|
|
Wrist
Transmitter (WS-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when the emergency button is pressed.
|
|
Pendent
Transmitter (PR-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when the emergency button is pressed.
|
|
Wireless
Outdoor Sensor (OS-200F)
It activates the Cybereye, wireless siren and wireless emergency lamp
with radio
wave when it detects an intruder outdoors.
|
|
Wireless
Emergency Lamp (LP-200F)
It blinks and sounds an alarm when it receives a signal from the optional
sensors
or emergency button is pressed.
|
|
Wireless
Emergency Lamp (LP-300F)
It blinks and sounds an alarm when it receives a signal from the optional
sensors
or emergency button is pressed. (Back up battery)
|
|
Security
Digital Camera System (IC-100A, IC-300C)
Image capture when it detects an intruder.
|
|
|
|
|
|
