|
|
|
|
|
 |
|
|
 |
Security Alarm System ( Cybereye (CE-200F)
) |
|
 |
|
 |
 |
| |
|
|
|
|
|
 |
|
Major
Functions |
|
 |
● Calls up to 5 designated
telephone numbers
●
24-hour intrusion and fire monitoring without monthly
fee
● Verification by
sound monitoring & voice warning from remote
locations
● Adjustable
entry and exit time delay
● Arms & disarms the system
using any phone
● Based
on the emergency situations, pertinent voice message is
played
●(Ex: Door sensor
activated, Fire sensor activated )
● Low battery indication with LCD
& voice message for replacement
● Compatible use with all
communication lines (Tone, Pulse, ADSL and ISDN )
● Emergency call can be made even
if the phone or fax line is busy
● Selectable arming either total
or perimeter
● Perimeter
arming is a useful function for those who keep pets at home to
prevent any undesired operation
● After confirmation, the system
can be disabled to stop the calling cycle
● A microprocessor to prevent any
undesired operation which may be caused by an external radio
wave
● installed.
● Test mode for easy installation
(Operation test between Cybereye and optional
sensors)
|
| |
|
|
|
Features |
|
|
|
|
|
|
|
1.
Speaker phone1. Scares the intruder away
with your voice via speaker
phone
1. - Siren
1. - Sounds an alarm when the
telephone line is cut |
|
|
|
|
|
2.
Microphone
1. Sound monitoring from
outside and talk to each other with your
phone |
|
|
|
|
|
3. Intruder
Alarm
1.
When it detects an intruder, the Cybereye
calls the pre-stored phone
1.
numbers (A preventive circuit for undesired
operation installed) |
|
|
|
|
|
4.
Fire Sensor
1. It makes the Cybereye call
the pre-stored phone numbers when ambient
1. temperature exceed 60
°C
|
|
|
|
|
|
5.
Emergency Feature
1. When an armed robber
threatens your family or an urgent situation arises
1. for the elderly /
patients, he or she may reach assistance by
pressing
1. the
emergency button on the remote control |
|
|
|
|
| |
|
|
|
Operation |
|
|
|
Operation sequence for the
intrusion detected |
[ Intrusion
] After calling wait time (entry delay
time) has elapsed, the system begins to call
[ Intrusion
] the pre-stored phone numbers
|
|
Operation sequence for
Fire |
[ Fire
] As soon as a fire is detected, the
system begins to call the pre-stored phone
numbers |
|
Operation sequence for an
Emergency |
|
[ Emergency ] As soon as the
emergency button on the remote control is pressed for
more than
[ Emergency
] a second, the system begins to call the
pre-stored phone numbers
[ Emergency ] Light : READY
- Off
[
Emergency ]
Light: EMERGENCY-Off after 3 times
blinking |
|
Operation sequence for Gas
Leakage |
[ Gas ] As soon as gas
leakage is detected, the system begins to call the
pre-stored
[ Gas ]
phone numbers |
|
Operation sequence for Power
Failure |
|
[ Power Failure ] The system
begins to call the pre-stored phone numbers 16 seconds
[ Power Failure ]
later after detection ofpower
failure |
|
| |
|
|
|
Installation |
|
|
● Applications
● Apartment, Silver town, Officetel,
Store, Bank, Police station, Hospital, Gas station, etc.
● anywhere a wireless
security system is needed.
● Detection Range
|
Direct Connection to the Wall
Outlet |
|
|
|
1. Connect the phone code ② to the telephone
outlet ③, and then connect the other end of
the
1. cord to the
LINE jack on the rear side of the main unit ①.
2. Connect the power adaptor ④ to the
electrical outlet ⑤, and then connect the cord of
the
1. adaptor to the
power jack on the rear side of the main unit
①.
3. Set Power ON/OFF switch on the rear side
of the main unit ① to the ON position.
4. Press
“ ARMED” or “OFF” button of the remote control and
check if the voice message can
1. be heard. (If it doesn't
work properly, turn the power switch to OFF and ON
for setup again)
5. After checking the
functionality of the wireless motion sensor ⑥, set
it up at the chosen
1.
location.
※ The wireless
sensor can be located up to 100 meters away from
※
the main unit,which may be
shortened depending on the site condition.
※
Make sure whether the sensor works
properly at the chosen location.
|
| |
|
Connection With a
Telephone |
|
|
|
|
1. Install the system as
above
2. Connect the
telephone cord ⑦ to the TEL jack on the rear side
of the main unit ①
※ Caution :
This system can be used by connecting to a normal
telephone but not
※
compatible with a key phone.
※ Even if the line is
busy, when you press the “EMERGENCY” button of
the
※
remote control for more than a
second, any phone call will be
disconnected
※ after
the voice message “ Line disconnected for
emergency call”, and notifying
※ an
emergency. |
| |
|
| |
|
|
|
Specifications |
|
|
|
ITEM |
CYBEREYE |
|
MODEL |
CE-200F |
CE-100 |
|
Function |
Intrusion |
O |
O |
|
Fire |
O |
O |
|
Emergency |
O |
X |
|
Power Failure |
O |
X |
|
Gas Leakage(option) |
O |
X |
|
Life Sensor (option) |
X |
X |
|
Car sensor (option) |
O |
X |
|
Detection Range |
Detection distance 8 m( Horizontal:
90°, Vertical: 23° ) |
|
Detecting Temperature |
Above 60°C |
|
Phone No. Entry |
8 |
5 |
|
Memory Phone No. Entry |
X |
|
Information Confirmation |
LCD + Voice |
Voice message |
|
Voice Range |
X
|
|
Voice Alarm |
For Activated Sensors |
X |
|
Voice Message |
Location and Emergency type
|
|
Wireless Range
|
100m
(Depends on the
obstacles)
|
X |
|
Power |
AC adaptor
(DC 9V
Rechargeable
Back-up battery)
|
AA size 1.5V X 3 |
|
Size |
204 X 96 X 60mm |
112 X 80 X 57mm |
|
Weight |
490g |
258g |
|
Options |
Refer to Optional
sensors’
specifications |
Wired door
sensor |
|
| |
|
|
|
Options |
|
|
|
Item |
Contents |
|
|
Wireless Motion Sensor
(BS-200F)
It activates the Cybereye,
wireless siren and wireless emergency
lamp with radio
wave when it detects an intruder or a
fire.
|
|
|
Wireless Door Sensor
(DS-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with
radio
wave when it detects an intruder entering
through a door or a window.
|
|
|
Wireless Siren
(SR-200F)
It sounds a loud alarm (105dB)
when it receives a signal from a remote control,
emergency switch or other optional sensors
|
|
|
Wireless Emergency Switch
(ES-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with
radio
wave when the emergency switch is pressed.
|
|
|
Wireless Smoke Sensor
(SS-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with
radio
wave when it detects a fire.
|
|
|
Wireless Smoke Sensor
(SS-300F)
It sounds an alarm and activates
the Cybereye, wireless siren and wireless
emergency
lamp with radio wave when it detects a
fire.
|
|
|
Wireless Gas Sensor
(GS-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with
radio
wave when it detects gas
leakage.
|
|
|
Wireless Window Sensor
(WD-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with radio
wave when it detects a window breakage or
impact.
|
|
|
Wrist Transmitter (WS-200F)
It activates the Cybereye, wireless siren
and wireless emergency lamp with radio
wave when the
emergency button is pressed.
|
|
|
Pendent Transmitter
(PR-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with radio
wave when the emergency button is pressed.
|
|
|
Wireless Outdoor Sensor
(OS-200F)
It activates the Cybereye,
wireless siren and wireless emergency lamp with radio
wave when it detects an intruder outdoors.
|
|
|
Wireless Emergency Lamp
(LP-200F)
It blinks and sounds an alarm when
it receives a signal from the optional sensors
or
emergency button is pressed.
|
|
|
Wireless Emergency Lamp
(LP-300F)
It blinks and sounds an alarm when
it receives a signal from the optional sensors
or
emergency button is pressed. (Back up battery)
|
|
|
Security Digital Camera System
(IC-100A, IC-300C)
Image capture when it
detects an intruder.
|
|
| |
|
|
